❤️‍🔥Heat and Mass Transfer Unit 3 – Convection Heat Transfer

Fundamentals of Convection

• Convection involves the transfer of heat through the movement of fluids (liquids or gases)
  • Fluid motion enhances heat transfer compared to conduction alone
• Convective heat transfer occurs due to the combined effects of conduction and fluid motion
• The rate of convective heat transfer depends on the fluid properties, flow characteristics, and temperature differences
• Convection plays a crucial role in various engineering applications (heat exchangers, cooling systems, HVAC)
• The driving force for convective heat transfer is the temperature gradient between the surface and the fluid
• Convective heat transfer can be quantified using Newton's law of cooling: $Q = hA(T_s - T_\infty)$
  • $Q$ is the convective heat transfer rate (W)
  • $h$ is the convective heat transfer coefficient (W/m²·K)
  • $A$ is the surface area (m²)
  • $T_s$ is the surface temperature (K)
  • $T_\infty$ is the fluid temperature far from the surface (K)

Types of Convection

• Convection can be classified into two main categories: forced convection and natural (or free) convection
• Forced convection occurs when an external means (pump, fan) is used to drive the fluid motion
  • Examples include air flow over a car's radiator or water flowing through a pipe
• Natural convection arises from buoyancy forces due to density differences caused by temperature variations in the fluid
  • Hotter fluid rises while cooler fluid sinks, creating a circulatory motion
• Mixed convection is a combination of forced and natural convection, where both mechanisms influence the heat transfer process
• The Rayleigh number ($Ra$) determines the relative importance of natural convection to forced convection
• Convection can also be classified as external (flow over a surface) or internal (flow within a confined space)

Boundary Layer Concepts

• The boundary layer is a thin region near a surface where the fluid velocity changes from zero at the surface to the free-stream velocity
• Boundary layers develop due to the no-slip condition, which states that the fluid velocity is zero at the surface
• The velocity boundary layer thickness ($\delta$) is defined as the distance from the surface where the velocity reaches 99% of the free-stream velocity
• The thermal boundary layer thickness ($\delta_t$) is the distance from the surface where the temperature difference between the fluid and the surface reaches 99% of the total temperature difference
• The Prandtl number ($Pr$) relates the velocity and thermal boundary layer thicknesses: $Pr = \frac{\nu}{\alpha}$
  • $\nu$ is the kinematic viscosity (m²/s)
  • $\alpha$ is the thermal diffusivity (m²/s)
• Boundary layers can be laminar or turbulent, affecting the heat transfer characteristics
  • Laminar boundary layers have smooth, parallel streamlines and lower heat transfer rates
  • Turbulent boundary layers have chaotic, mixing flow and higher heat transfer rates

Dimensionless Numbers in Convection

• Dimensionless numbers are used to characterize and analyze convective heat transfer problems
• The Reynolds number ($Re$) represents the ratio of inertial forces to viscous forces: $Re = \frac{\rho VL}{\mu}$
  • $\rho$ is the fluid density (kg/m³)
  • $V$ is the fluid velocity (m/s)
  • $L$ is the characteristic length (m)
  • $\mu$ is the dynamic viscosity (kg/m·s)
• The Nusselt number ($Nu$) represents the ratio of convective to conductive heat transfer: $Nu = \frac{hL}{k}$
  • $h$ is the convective heat transfer coefficient (W/m²·K)
  • $L$ is the characteristic length (m)
  • $k$ is the thermal conductivity (W/m·K)
• The Prandtl number ($Pr$) represents the ratio of momentum diffusivity to thermal diffusivity: $Pr = \frac{\nu}{\alpha}$
• The Grashof number ($Gr$) represents the ratio of buoyancy forces to viscous forces in natural convection: $Gr = \frac{g\beta(T_s - T_\infty)L^3}{\nu^2}$
  • $g$ is the acceleration due to gravity (m/s²)
  • $\beta$ is the volumetric thermal expansion coefficient (1/K)

Forced Convection Equations

• Forced convection equations are used to calculate the heat transfer coefficient and Nusselt number for various flow configurations
• For external flow over a flat plate, the local Nusselt number can be calculated using the Dittus-Boelter equation: $Nu_x = 0.0296Re_x^{4/5}Pr^{1/3}$
  • Valid for $0.6 \leq Pr \leq 60$ and $Re_x \geq 10^5$
• For internal flow in a circular tube, the Nusselt number can be calculated using the Sieder-Tate equation: $Nu = 0.027Re^{0.8}Pr^{1/3}(\frac{\mu}{\mu_s})^{0.14}$
  • Valid for $0.7 \leq Pr \leq 16,700$ and $Re \geq 10,000$
  • $\mu$ is the fluid viscosity at the bulk temperature
  • $\mu_s$ is the fluid viscosity at the surface temperature
• The Gnielinski correlation can be used for turbulent flow in a circular tube: $Nu = \frac{(f/8)(Re - 1000)Pr}{1 + 12.7(f/8)^{1/2}(Pr^{2/3} - 1)}$
  • Valid for $0.5 \leq Pr \leq 2000$ and $3000 \leq Re \leq 5 \times 10^6$
  • $f$ is the friction factor, which can be calculated using the Colebrook equation or Moody chart

Natural Convection Principles

• Natural convection occurs due to buoyancy forces arising from density differences caused by temperature variations
• The driving force for natural convection is the Grashof number ($Gr$), which represents the ratio of buoyancy forces to viscous forces
• The Rayleigh number ($Ra$) is the product of the Grashof and Prandtl numbers: $Ra = GrPr$
  • It characterizes the flow regime in natural convection (laminar, transitional, or turbulent)
• For natural convection over a vertical plate, the Nusselt number can be calculated using the Churchill and Chu correlation: $Nu = (0.825 + \frac{0.387Ra^{1/6}}{[1 + (0.492/Pr)^{9/16}]^{8/27}})^2$
  • Valid for $Ra \leq 10^{12}$
• For natural convection in enclosures (rectangular cavities), the Nusselt number depends on the aspect ratio and Rayleigh number
• Correlations for natural convection in various geometries (horizontal plates, cylinders, spheres) are available in the literature

Heat Transfer Coefficients

• The heat transfer coefficient ($h$) quantifies the rate of heat transfer between a surface and a fluid
• It depends on the fluid properties, flow characteristics, and surface geometry
• Heat transfer coefficients are typically determined experimentally or estimated using empirical correlations
• The overall heat transfer coefficient ($U$) accounts for the combined effects of conduction and convection in a system
  • It is used in the design of heat exchangers and other thermal systems
• The thermal resistance concept can be used to analyze convective heat transfer in series or parallel arrangements
  • Thermal resistances are analogous to electrical resistances in a circuit
• The Biot number ($Bi$) is a dimensionless parameter that relates the internal conduction resistance to the external convection resistance: $Bi = \frac{hL_c}{k}$
  • $L_c$ is the characteristic length (m)
  • It helps determine whether lumped system analysis can be applied

Real-World Applications

• Convective heat transfer is encountered in numerous real-world applications across various industries
• In the automotive industry, convective heat transfer is crucial for engine cooling, radiator design, and cabin air conditioning
• HVAC (Heating, Ventilation, and Air Conditioning) systems rely on convective heat transfer to maintain comfortable indoor environments
  • Natural convection plays a role in passive cooling strategies (natural ventilation)
  • Forced convection is used in air handling units, fan coil units, and ductwork
• Heat exchangers, used in power plants, chemical processing, and refrigeration systems, utilize convective heat transfer to efficiently transfer heat between fluids
• Electronic devices (computer chips, power electronics) require effective convective cooling to dissipate heat and maintain optimal operating temperatures
  • Heat sinks and fans are designed to enhance convective heat transfer
• In the food industry, convective heat transfer is employed in cooking, baking, and drying processes
  • Ovens, fryers, and dryers rely on forced convection to uniformly heat or remove moisture from food products
• Renewable energy systems, such as solar thermal collectors and geothermal heat pumps, harness convective heat transfer to capture and utilize thermal energy from the environment