11.1 Sensors and transducers for vibration measurement
3 min read•july 30, 2024
Vibration sensors are crucial tools for measuring and analyzing mechanical system vibrations. From accelerometers to velocity and displacement sensors, these devices capture different aspects of vibration, helping engineers understand and control system behavior.
Selecting the right sensor involves considering frequency range, amplitude, and environmental factors. Understanding sensor principles and specifications like , , and dynamic range is key to accurate vibration measurement and analysis in mechanical systems.
Vibration Sensors: Types and Transducers
Accelerometers and Their Mechanisms
Top images from around the web for Accelerometers and Their Mechanisms
Frontiers | Quantitative Comparison of the Performance of Piezoresistive, Piezoelectric ... View original
Is this image relevant?
Summary of Research Status and Application of MEMS Accelerometers View original
Is this image relevant?
LSM6DSL - 3D accelerometer and 3D gyroscope - Electronics-Lab View original
Is this image relevant?
Frontiers | Quantitative Comparison of the Performance of Piezoresistive, Piezoelectric ... View original
Is this image relevant?
Summary of Research Status and Application of MEMS Accelerometers View original
Is this image relevant?
1 of 3
Top images from around the web for Accelerometers and Their Mechanisms
Frontiers | Quantitative Comparison of the Performance of Piezoresistive, Piezoelectric ... View original
Is this image relevant?
Summary of Research Status and Application of MEMS Accelerometers View original
Is this image relevant?
LSM6DSL - 3D accelerometer and 3D gyroscope - Electronics-Lab View original
Is this image relevant?
Frontiers | Quantitative Comparison of the Performance of Piezoresistive, Piezoelectric ... View original
Is this image relevant?
Summary of Research Status and Application of MEMS Accelerometers View original
Is this image relevant?
1 of 3
Vibration sensors categorized into three main types measure different aspects of vibration (accelerometers, velocity sensors, displacement sensors)
Piezoelectric accelerometers generate electrical charge proportional to applied acceleration using the piezoelectric effect
Capacitive accelerometers detect acceleration by measuring changes in capacitance due to internal mass movement
Piezoresistive accelerometers measure acceleration-induced stress on a suspended mass using strain gauges
Accelerometers operate based on Newton's Second Law of Motion where force on a proof mass relates proportionally to its acceleration
Velocity and Displacement Sensors
Velocity sensors (electromagnetic velocity pickups) measure rate of change of displacement in vibrating structures
Displacement sensors directly measure physical movement of vibrating objects (eddy current probes, linear variable differential transformers (LVDTs))
Laser Doppler vibrometers use Doppler effect to measure velocity and displacement of vibrating surfaces without contact
Velocity sensors typically use a magnet moving through a coil to generate voltage proportional to velocity based on Faraday's law
Eddy current displacement sensors detect changes in magnetic field caused by eddy currents induced in a conductive target
LVDTs measure displacement using principle of mutual inductance between a primary coil and two secondary coils
Working Principles of Vibration Sensors
Accelerometer Principles
Piezoelectric accelerometers generate electrical charge when stressed, converted to voltage output proportional to acceleration
Capacitive accelerometers measure capacitance change between fixed plates and movable plate attached to proof mass
Piezoresistive accelerometers use strain gauges to measure stress induced by acceleration on suspended mass
Resonance frequency limits upper frequency of accurate measurement for accelerometers
Velocity and Displacement Sensor Principles
Electromagnetic velocity sensors generate voltage proportional to velocity based on Faraday's law of electromagnetic induction
Eddy current displacement sensors detect changes in magnetic field caused by induced eddy currents in conductive target
LVDTs measure displacement using mutual inductance between primary and secondary coils
Laser Doppler vibrometers measure Doppler shift in reflected laser beam to determine vibrating surface velocity
Sensor Selection for Vibration Measurement
Frequency and Amplitude Considerations
Frequency range of interest critical for sensor selection (accelerometers for high-frequency up to several kHz, velocity sensors for mid-frequency ~1 Hz to 1 kHz, displacement sensors for low-frequency below 100 Hz)
Amplitude range of expected vibration must ensure accurate measurement without saturation or insufficient sensitivity
Dynamic range defines ratio between largest and smallest measurable vibration amplitudes (expressed in decibels)
Required accuracy and resolution of measurement should match selected sensor specifications
Temperature range and temperature sensitivity specify operational limits and performance variation with temperature
Vibration Sensor Specifications and Characteristics
Sensitivity and Frequency Response
Sensitivity expressed in different units for each sensor type (mV/g for accelerometers, mV/(in/s) for velocity sensors, mV/mil for displacement sensors)
Frequency response describes usable frequency range of sensor (specified as deviation from reference sensitivity, ±5% or ±3 dB)
Resonance frequency important for accelerometers as it limits upper frequency of accurate measurement
Additional Performance Metrics
Transverse sensitivity indicates sensor's susceptibility to vibrations perpendicular to primary sensing axis
Linearity describes consistency of sensor's output corresponding to input across measurement range (expressed as percentage of full scale)
Dynamic range defines ratio between largest and smallest measurable vibration amplitudes (expressed in decibels)
Temperature range and temperature sensitivity specify operational limits and performance variation with temperature